Products

6 Item(s)

per page

Set Descending Direction
  1. MicRig Stereo
    Sevenoak

    MicRig Stereo

    Product Features:

    -High-quality stereo microphone;
    -Designed for use with DSLR cameras, camcorders, Gopro, smartphone;
    -Compact, lightweight design;
    -Adjusted sound attenuation (0dB,+10dB);
    -Low-cut filter switch;
    -Power: one 1.5V AA battery;
    -Frequency response: 35-20,000HZ+/-3dB;
    -Sensitivity: -35dB+/-1dB/0dB=1V/Pa, 1kHz;
    -Signal-to-noise ratio: 78dB or more;
    -Microphone: two 9.7mm condenser mics;
    -Output impedance: 2000 ohm or less;

    View Product
  2. Seven Oak Cage for Blackmagic Pocket Cinema Camera SK-BPC10
    Sevenoak

    Seven Oak Cage for Blackmagic Pocket Cinema Camera SK-BPC10

    Product Features:

    -Anodized Aluminum + Wood Construction
    -Custom Fitted for the Blackmagic Pocket Cinema Camera; Allows access to all camera functions and ports
    -Multi-Threaded Cage and Removable Top Handle
    -Rod Clamp with 15mm Rods for Follow Focus, Matte Box, etc
    -Arca Swiss, 1/4" and 3/8" Tripod Mounting Options

    View Product
  3. Seven Oak Cage for DSLRs SK-C03
    Sevenoak

    Seven Oak Cage for DSLRs SK-C03

    Product Features:

    -Gives your camera protection and stability, while adding mounting options
    -Compatible with most DSLR cameras
    -Maximum load capacity: 20kg
    -Retain full access to camera controls, buttons, batteries, etc -Camera Cage;Mini HDMI to HDMI adapter cable;Camera Locking Screw Key;2 x Alum Key;Instructions

    View Product
  4. Seven Oak Cage SK-A7C1 for Sony a7, A7s, a7R, a7 II, A7R II
    Sevenoak

    Seven Oak Cage SK-A7C1 for Sony a7, A7s, a7R, a7 II, A7R II

    Product Features:

    -Anodized Aluminum + Wood Construction
    -Custom Fitted for the Sony A7, A7S & A7R (MK I only, will not fit MK II); Allows access to all camera functions and ports
    -Multi-Threaded Cage and Removable Top Handle
    -Rod Clamp with 15mm Rods for Follow Focus, Matte Box, etc
    -Arca Swiss, 1/4" and 3/8" Tripod Mounting Options

    View Product
  5. Seven Oak Cage SK-GHC20 for Panasonic GH3, GH4
    Sevenoak

    Seven Oak Cage SK-GHC20 for Panasonic GH3, GH4

    Product Features:

    -Includes: Aluminum Cage with Top Handle, Shoe Mount and 15mm Rods - Custom Fit for the Panasonic Lumix DMC-GH3 & GH4- Allows access to all camera functions and ports
    -Anodized Aluminum. Multi-Threaded Cage and Removable Top Handle. Rod Clamp with 15mm Rods for Mounting Follow Focus, Matte Box, etc.
    -The form fitting camera cage allows full access to the camera's controls, buttons, battery and SD card slot. The cold shoes, 1/4" and 3/8" mounting points allows you to mount different accessories.
    -Quick release base plate allows you to easily remove and remount the camera to the rods. With 1/4" and 3/8" mounting points on the quick release plate, the cage can be easily mounted and removed from a tripod, rig or other device.
    -The HDMI plug protector frees you from worrying about wearing out or damaging the micro HDMI port by repeatedly plugging or replugging a micro HDMI cable into your camera body.

    View Product
  6. Seven Oak Handgrip SK-H02
    Sevenoak

    Seven Oak Handgrip SK-H02

    Product Features:

    -You can attach multiple accesories onto the 1/4" and 3/8" screw thread -connectors, like a microphone or monitor.
    -The built-in level makes sure you will always have a straight horizon
    -A special handle makes sure you will -have a good grip
    -On top of the SK-H02 there is a hotshoe. As an example, you can attach a LED-light to this

    View Product

6 Item(s)

per page

Set Descending Direction