Products
-
Sennheiser
AMBEO VR 3D Microphone
Product Features:
-Ideal for Capturing Audio Used in VR
View Product
-4 Matched KE 14 Cardioid Capsules
-Tetrahedral Arrangement of Capsules
-Captures Immersive "Spherical" Audio
-Operates in Ambisonics Technique
-Rugged & Portable for Various Locations
-Includes A-B Format Converter Software
-Operates in AU, AAX, VST & Standalone
-Includes Cable, Mount & Wind Shield -
Neumann
BCM 104
Product Features:
- Large-diaphragm condenser capsule
View Product
- Cardioid directional characteristic
- Characteristic, functionally optimized design*
- Integrated pop protection
- Integrated elastic suspension
- Individual headgrilles for different users
- Colored rings to identify the replacement headgrilles
- Easy removal and cleaning of microphone headgrille (with bayonet mount)
- Mechanical compatibility with standard studio boom arms
- Internal switches: high-pass and pre-attenuation -
Neumann
BCM 705
Product Features:
- Dynamic capsule
View Product
- Hypercardioid directional characteristic
- Characteristic, functionally optimized design*
- Integrated pop protection
- Integrated suspension
- Individual headgrilles for different users
- Colored rings to identify the replacement headgrilles
- Easy removal and cleaning of microphone headgrille (with bayonet mount)
- Mechanical compatibility with standard studio boom arms
- Multi-level isolation from structure-borne noise
- No power supply required -
Sennheiser
e 614
Product Features:
- Rugged design
View Product
- Effective rejection of incidental rear noise
- Excellent directivity across the whole frequency range
- Full, natural sound
- High maximum sound pressure level
- Wide frequency response -
Sennheiser
e 912 S WH
Product Features:
- Programmable membrane switch
View Product
- Very unobtrusive due to flat design
- Extremely rugged sound inlet basket
- Rubber damping plate on base
- Mounting slots for mounting the microphone to table tops, lecterns, etc.
- Gold-plated XLR connector
I- ntegrated electronics (instead of in-line preamp)
- An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON)
- The frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912).
- The e 912 S has been optimized for picking up speech at relatively short distances, while the sister model e 916 has been designed for instrument pick up. For this reason, the frequency response curve of the e 912 S differs from that of the e 912.
- With the e 912 S, you can obtain the frequency response curve of the e 912 by setting the DIP switch to the position lin (linear). -
Sennheiser
e 912 WH
Product Features:
- Programmable membrane switch
View Product
- Very unobtrusive due to flat design
- Extremely rugged sound inlet basket
- Rubber damping plate on base
- Mounting slots for mounting the microphone to table tops, lecterns, etc.
- Gold-plated XLR connector
- Integrated electronics (instead of in-line preamp)
- An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON)
- The frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912).
- The e 912 S has been optimized for picking up speech at relatively short distances, while the sister model e 916 has been designed for instrument pick up. For this reason, the frequency response curve of the e 912 S differs from that of the e 912.
- With the e 912 S, you can obtain the frequency response curve of the e 912 by setting the DIP switch to the position lin (linear). -
Sennheiser
e 914
Product Features:
- Exceptionally lively, clear sound
View Product
- Three-position sensitivity switch
- Three-position bass roll-off/cut-off switch
- Very high sound pressure handling capability -
Neumann
M 147 tube
Product Features:
- M 147 Tube microphone
View Product
- N 149 A power supply incl. power cable
- SG 2 swivel mount
- KT 8 microphone cable
- Dust cover
- Aluminium case -
-
Neumann
M 149 tube set
Product Features:
- M 149 Tube Microphone
View Product
- N 149 A Power supply incl. power cable
- KT 8 Connecting cable
- EA 170 Elastic suspension
- Aluminium case
- Dust cover -
-
Neumann
M150 tube set
Product Features:
- M 150 Tube Microphone
View Product
- N 149 A Power supply
- EA 170 Elastic suspension
- KT 8 Connecting cable
- Aluminium case -
Neumann
M150 tube stereo set
Product Features:
- 2 x M 150 Tube Microphone
View Product
- 2 x N 149 A Power supply
- 2 x EA 170 Elastic suspension
- 2 x KT 8 Connecting cable
- Aluminium case -
Sennheiser
MKH 20-P48
Product Features:
- Exceptionally flat frequency response, switchable for near and diffuse field applications
View Product
- High-frequency response can be accentuated by means of a pressure build-up ring
- Slightly increasing directivity at high frequencies to adjust tonal balance
- Exceptionally low inherent self-noise
- Transformerless and fully floating balanced output
- Switchable pre-attenuation
- Black, anodised light metal body -
Sennheiser
MKH 30-P48
Product Features:
- High rejection of lateral sounds
View Product
- Exceptionally low inherent self-noise
- Symmetrical transducer technology ensures extremely low distortion
- Transformerless and fully floating balanced output
- Switchable roll-off filter to compensate for proximity effects at a distance of approx. 0.5 m
- Switchable pre-attenuation
- Black, anodised light metal body -
Sennheiser
MKH 40-P48
Product Features:
- Maximum front-to-back ratio
View Product
- Exceptionally low inherent self-noise
- Symmetrical transducer technology ensures extremely low distortion
- Transformerless and fully floating balanced output
- Switchable roll-off filter to compensate for proximity effects at a distance of approx. 0.5 m
- Switchable pre-attenuation
- Black, anodised light metal bodv -
Sennheiser
MKH 50-P48
Product Features:
- High rejection of lateral sounds
View Product
- Exceptionally low inherent self-noise
- Transformerless and fully floating balanced output
- Symmetrical transducer technology ensures extremely low distortion
- Switchable roll-off filter to compensate for proximity effects at a distance of approx. 0.5 m
- Switchable pre-attenuation
- Black, anodised light metal body -
Sennheiser
MKH 800 P48
Product Features:
- Extended frequency response up to 50 kHz
View Product
- Wide, flat frequency response
- Exceptionally low inherent self-noise, wide dynamic range
- Switchable pre-attenuation, switchable roll-off filter and switchable treble emphasis
- Transformerless and fully floating balanced output
- LED for on-axis alignment
- Anodised light metal body -
Sennheiser
MKH 800 TWIN Ni
Product Features:
- Color: Nickel
View Product
- The remote adjustability and the variable pick-up patterns make the MKH 800 TWIN a universal main microphone, soloist microphone or supporting microphone.
- The pick-up patterns can be set and optimised under monitoring conditions. In other words, it is not necessary to fix the pick-up patterns definitively before recording.
- A wide range of mixes for stereo and surround are possible (including in parallel).
- Saving of the microphone signals in two channels also allows an unlimited range of mixes to be realised at a later date.
- The high sensitivity ensures interference-free signal paths as a result of high signal levels. The inherent noise of downstream microphone amplifiers is thus of minor importance.
- Very low inherent noise prevents the masking of filigree sound structures. The depth of the acoustic can be heard more clearly too.
- High linearity of the transducers minimises the signal distortions and ensures the transparency of the sound even at high sound levels.
- The frequency response extends to 50 kHz, thus improving the resolution for complex acoustic details.
- Stable pick-up patterns minimise sound distortion in the direct and diffuse field.
- Negative acoustic effects caused by the housing and the sound inlet basket are minimised.
- The small, slim design and the optionally dark housing design (Nextel) make it visually unobtrusive. -
Sennheiser
MKH 8020
Product Features:
- onmi-directional pick-up pattern
View Product
- modular design
- wide frequency response 10 to 60.000 Hz
- symmetrical transducer with 2 backplates providing extremly low distortion
- extremly low inherent self-noise
- accurate directional pattern
- non reflective Nextel coating
- Ideal for stereo and surround recordings, as an M microphone and for ambience -
Sennheiser
MKH 8040
Product Features:
- cardioid pick-up pattern
View Product
- modular design
- wide frequency response 30 to 50.000 Hz
- symmetrical transducer with 2 backplates providing extremly low distortion
- extremly low inherent self-noise
- accurate directional pattern
- non reflective Nextel coating
- ideal as a spot microphone and for surround recordings -
Sennheiser
MKH 8050
Product Features:
- super-cardioid pick-up pattern
View Product
- modular design
- wide frequency response 30 to 50.000 Hz
- symmetrical transducer with 2 backplates providing extremly low distortion
- extremly low inherent self-noise
- accurate directional pattern
- non reflective Nextel coating
- provides optimum separation of instrumentss -
Sennheiser
MZD 8000
Product Features:
- 2-channel 24 Bit-AD-converter, dynamic range 115 dB
View Product
- Studio grade preamp and converter
- Sampling rate 44,1 kHz, 48kHz, 88,2 kHz, 96 kHz, 176,4kHz and 192 kHz
- Remote controlled DSP functions like low cut filter and attenuation
- Digital output in AES 42 format
- External synchronisation via AES 42, Mode 2
- Colour: Nextel -
Sennheiser
MZF 8000
Product Features:
- Switchable roll-off filter (-3 dB at 160 Hz)
View Product
- Fixed low-cut filter (-3 dB at 16 Hz)
- Suppresses infrasound especially well
- Extremely low inherent noise - complex acoustic details are preserved
- High-quality -10 dB pad protects against overdriving
- Fully floating balanced output allows for non-critical connection technology with minimal distortion
- Extremely compact design
- Module can be used with remote accessory -
Sennheiser
SPB 8000
Product Features:
- Supplies microphones with 48 V phantom power
View Product
- Input switchable between analog and digital AES3 signals
- Switchable compressor
- 4 programmable presets for storage of 5.1 surround parameters
- SPB 8000 adjustable via a web interface