Product Features:

- The product features wireless and long distance transmission range which is up to 200m, and it also supports real-time 1080P video transmission.
- Good stability and strong anti-jamming capability under 5GHz frequency band.
- Strong flexibility; support manual setting for frequency.
- Exquisite design; equipped with external SONY F970 battery mechanical interface for battery plug-in.

Product Features:

- Support multi-channel-switch and 1 transmitter to multi receivers
- Support 1080p/60Hz, HDMI/HD-SDI/3G-SDI 4:2:2, 10Bits HD Video transmission
- Very good image quality with very Low latency - < 1ms
- Effective range:Up to 800M
- Compatible for EDID strcture 1.1, support HDMI 1.3version
- Plug & Play – full hardware design, no software is required
- AES128/256 Encryption。

Product Features:

Beamlink Quad, a full HD wireless transmission for MULTIPLE cameras simultaneously.
-Anti-interference (Unique in 4 channels video synchronously transmission taking ONLY one channel frequency)
-4 transmitters to 1 receiver
-The receiver 3060 can link with video production studio switcher directly with both HDMI/SDI 4 channels video output.
-Resolution up to Full HD 1080P/60
-Supports tally
-Supports IP streaming (RTSP)
-TX with V-lot hole and Sony battery socket for power supply and fixing
-Distance: up to 500m
-~70ms latency

Product Features:

- Operates on the 60GHz license-exempt spectrum
- Dual-channel operation supports 3D-HDTV or two single channels uncompressed SMPTE 292M
- 2.97Gbps aggregate throughput to 500 metres
- Error-free operation including all HDSDI pathological patterns
- Dielectrically loaded 5° lens antenna for high signal gain and manageable beam width
- Optical sight and RSSI bar graph for confirmation of optimal alignment
- Optical interface options available

Product Features:

- Fits between the camera battery plate and a Anton Bauer battery. Available in SD or SD-SDI.

Product Features:

- Ideal for Steadicam or DV/Film camera operation, where no battery mount is available. Available in SD or SD-SDI.

Product Features:

- Portable mount diversity receiver. Available in SD or SD-SDI.

Product Features:

- Available in SD or SD-SDI

Product Features:

- Fits between the camera battery plate and a V-Lok battery. Available in SD or SD-SDI

Product Features:

-Transmission Range: 1200ft
-Channel Selection: 0-9
-Supply Voltage：7-36V DC
-OLED Screen
-3G-SDI In/Loop Out,HDMI In/Out
-USB Firmware Upgrade
-No Compression, No Latency
-Flexible and Strong Antenna
-Self-Diagnosis and Channel Scan
-Support Timecode &Trigger

Product Features:

-HDMI/SDI Input, SDI Loop, 3.5mm Audio
-HDMI/Dual SDI Outputs
-2000' 1080p60 Transmission, <1ms Latency
-5.1-5.9 GHz Frequency Band
-ALEXA Mini Playback without Waiting
-Encrypted to Prevent Video Leakage
-OLED Screen; Smart Cooling Fan
-Transmitter: 4-Pin LEMO Power Connector
-Receiver: V-Mount Plate & 4-Pin LEMO
-D-Tap to LEMO Cables Included

Product Features:

-HDMI and SDI Input/Output
-Up to 1080p60 4:2:2 Transmission
-400' Line-of-Sight Range
-<1 ms Latency
-5.1 to 5.9 GHz Frequency Band
-10-Step Frequency Selector Knob
-Up to Four Sets Work on Same Frequency
-AES-128 Encryption
-Metal Housings
-L-Series Plates and D-Tap to LEMO Cables

Product Features:

-HDMI/SDI Input, SDI Loop, 3.5mm Audio
-HDMI/Dual SDI Outputs
-600' 1080p60 Transmission, <1 ms Latency
-5.1-5.9 GHz Frequency Band
-Auto Sync with Camera Recording
-AES-128 Encryption
-OLED Screen
-Timecode
-L-Series / V-Mount Battery Plates
-D-Tap to LEMO Cables

Product Features:

- Wireless HDMI transmitter and receiver set
- Transmits over WHDI antenna technology on license free 5 GHz frequency band
- Transmits video signals up to 1080i60 uncompressed 30 to 300 ft with < 1 ms latency
- Supports multiple video formats and frame rates
- Dynamic Frequency Selection (DFS) function uses less congested channels for best performance
- Conforms to FCC, CE, and RoHS specifications

Product Features:

- Transmits 164' Without Quality Loss
- Transmits up to 380' Maximum
- Supports up to 1080p60 4:2:2 10-Bit
- SDI Loopthrough on Transmitter
- Uses 5 GHz WHDI Wireless Technology
- GPI Output on Transmitter
- Transmitter Camera Mountable

Product Features:

- Standard broadcast and cinema video formats up to 1080/60i
- Two channels of embedded audio for stereo monitoring
- Transmission range of 30 - 328 ft (may vary depending on site conditions)
- Dynamic Frequency Selection (DFS) allows operation on less crowded channels
- Integrated V-Mount for camera and battery connection
- 4 selectable channels and 1 DFS on TX and RX
- Multiple Multicast operation; up to four TXs can transmit to multiple RXs in close vicinity
- Zero frame delay; less than 1ms latency
- TX features loop-through; RX has dual simultaneous outputs
- 3/8" screw hole on TX and RX for flexible mounting
- Conforms to major technical and environmental standards including FCC, CE, MIC (TELEC) and RoHS specifications

Product Features:

-USB Firmware Upgrade
-Dual HDMI Input / Output
-Compact and Lightweight, and Easy to install
-Working Voltage 6-16 VDC
-300 feet + Transmission Range
-No Stagnation, No Trailing, No Mosaic
-Point to Point
-5GHz Frequency Band

Product Features:

- Zero frame delay
- HDSDI, SDI, component, composite video input
- Extremely high quality 4:2:2 video
- 5.1 - 5.9GHz licence exempt band
- Secure encrypted transmission in unicast mode
- Removable antennas
- Lightweight design
- Switch between Anton Bauer and V-Lok plates

Product Features:

- Zero frame latency (<1 millisecond)
- 5.1-5.9GHz license exempt band
- Extremely high quality 4:2:2 video transmission
- Embedded time code transport
- Manual or automatic channel select
- Switch between multiple cameras
- Secure encrypted transmission in unicast mode
- Simultaneous HD down-converter/scaler
- Signal strength meter on each antenna