The RTS Cronus Digital Matrix Intercom includes a proprietary active feedback elimination circuit to allow high-volume operation in confined spaces without feedback. The Cronus features LAN and USB connectivity for programming, the USB ports being available on both front and rear panels, and front-panel shaft encoders and displays permit extensive control without the need for a PC in many applications.
Cronus also has the ability to link, via an interface card, to existing ADAM matrices, allowing Cronus to function as a “satellite” matrix to any existing ADAM from a 128-port single frame to a frame of more than 800 ports. This combined system appears as a single large matrix, without the need for trunking. Cronus will be available initially with high-quality analog inputs and outputs.
Cronus features advanced DSP processing with frequency shaping and vox, and also includes a proprietary active feedback elimination circuit to allow high-volume operation in confined spaces without worrisome feedback problems.
The RTS Cronus is a 32-port digital matrix intercom in 2 RU (rack units). Based upon an advanced DSP (Digital Signal Processor) architecture, Cronus has the ability to link up to four (4) units into a single 128 port matrix. Through the use of standard video coaxial cable, the maximum distance between the first and last Cronus system can be up to 300ft., and still appear as a single matrix. However, when using the Fiber Option card, the distance is increased up to 15 kilometers nominally. When connected as a single matrix, the individual Cronus control remains autonomous and independent at each matrix for the highest
Convenient front panel access as well as traditional rear access for system programming. Note, you may use either the front panel access or the rear panel access at a time.
Digital signal processing designed to support audio signal processing on all 32 ports (inputs).
Cronus is a modular 2RU frame with a capacity of 8 to 32 ports. Up to four units can be linked for a total capacity of 128 ports
Redundant Power Supply
Each chassis is powered by two power supplies, either of which can sufficiently power all the equipment ALONE. This provides constant power and disaster recovery even with the failure of one power supply.
Different backcards with or without transformers available.
RVON-C VoIP Option Card
Voice-Over IP option expands the capabilities of the system.